These units incorporate two switching channels, each of which can be independently configured as a transmitter or receiver.  The units can be powered directly from the mains or from a low voltage source.  When a channel is used for sending a switch signal, this can be achieved by the open/close of a contact or application or removal of a voltage. The LED status indicates the operation and can confirm reception of signal.  When a channel is used for receiving a switch command, the output is via completely independent volt free SPCO contacts rated at 10Amps. The relays status is indicated by an on-board LED.

 

These units incorporate eight switching channels, each of which can be independently configured as a transmitter or receiver.  The units can be powered directly from the mains or from a low voltage source.  When a channel is used for sending a switch signal, this can be achieved by the open/close of a contact or application or removal of a voltage. The LED status indicates the operation and can confirm reception of signal.  When a channel is used for receiving a switch command, the output is via completely independent volt free SPCO contacts rated at 10Amps. The relays status is indicated by an on-board LED.

 

Fix:- This product can be used for sending signal status from a self-contained battery powered compact IP rated transceiver. Depending on the application the unit can operate from a switched ‘clean’ contact, application of a control voltage, up to 9 N/O switch contacts. The unit can provide positive confirmed feedback, low battery status and a ‘watchdog’ pulse for more critical applications. The unit can be provided in PCB form to allow incorporation in customer specific product applications.  The unit is extremely versatile and can be custom configured.

 

Handheld:- This ergonomic product provides positive feedback indicated by the colour of the status indicator LED enhanced by the positive tactile feel of the quality membrane wipe clean keypad. The unit will indicate when the single standard alkaline AAA cell requires replacement. The unit can be pre-configured to operate in line with the specific requirements of the application.

 

 

The ‘NoWyr’ SMS switch is designed to allow physical switching of electrical products and the reporting of electrical switching and/or alarm conditions via text message.  The system is designed as a completely self contained unit that can be supplied from a low voltage source or directly from a mains supply without the need for any additional power supplies.

Standard features include Tri-Band GSM connectivity, Customisable commands, IP65 rated enclosure,  Alarm redirect management and optional battery back up facility.

 

The ‘RCU’ range are basic remote control units.  They can be operated from 2/3 button keyfob transmitters.

The receivers can be powered by 12-24V or directly from mains and have dip switch selectable output configurations.